BMYHB - 4326, ZINC CHLORIDE
- MSDS: BMYHB
- Manufacturer: J T BAKER INC
- Product Name: 4326, ZINC CHLORIDE
- National Stock Number: 6810-00N028693
Product Identification
Product ID:4326, ZINC CHLORIDE
MSDS Date:09/05/1986
FSC:6810
NIIN:00N028693
MSDS Number: BMYHB
Responsible Party
PHILLIPSBURG, NJ 08865-2219
US
Emergency Phone: 201-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
ZINC CHLORIDE (SARA III)
CAS: 7646-85-7
RTECS: ZH1400000
OSHA PEL 1 MG/M3/2 STEL
ACGIH TLV: 1 MG/M3/2STEL FUME93
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:LD50:(ORAL RAT) 350 MG/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONTACT WITH SKIN OR EYES MAY CAUSE
SEVERE IRRITATION OR BURNS. INGESTION MAY CAUSE NAUSEA, VOMITING,
HEADACHES, DIZZINESS, GASTROINTESTINAL IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:INGEST:DO NOT INDUCE VOMITING; IF CONSCIOUS, GIVE WATER,
MILK, OR MILK OF MAGNESIA. INHAL:MOVE TO FRESH AIR. IF NOT
BREATHING, GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS DIFFICULT,
GIVE OXYGEN. EYE: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15
MINUTES. SKIN: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES
WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. WASH CLOTHING
BEFORE REUSE.
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.MOVE EXPOSED CNTNRS FROM FIRE AREA IF CAN BE DONE WITHOUT RISK.
USE WATER TO KEEP FIRE-EXPOSED CNTNRS COOL.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE CLOTHING. WITH CLEAN SHOVEL, CAREFULLY PLACE MATERIAL
INTO CLEAN, DRY CONTAINER AND COVER; REMOVE FROM AREA. FLUSH SPILL
AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN CORROSION-PROOF AREA.
Other Precautions:KEEP CONTAINER TIGHTLY CLOSED.
Exposure Controls
Respiratory Protection:RESPIRATORY PROTECTION REQUIRED IF AIRBORNE
CONCENTRATION EXCEEDS TLV. AT CONCENTRATIONS UP TO 9 PPM, A
NIOSH/MSHA APPROVED HIGH-EFFICIENCY PARTICULATE RESPIRATOR IS
RECOMMENDED. ABOVE THIS LEVEL, A N IOSH/MSHA APPROVED SCBA IS
ADVISED.
Ventilation:USE GENERAL OR LOCAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:UNIFORMS AND APRONS. EMERGENCY EYEWASH AND
DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:C2
Boiling Pt:B.P. Text:1350F,732C
Melt/Freeze Pt:M.P/F.P Text:554F,290C
Vapor Density:4.7
Spec Gravity:2.9 (H2O=1)
Solubility in Water:COMPLETE
Appearance and Odor:WHITE, ODORLESS GRANULES
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
POTASSIUM METAL.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:ZNOX, CL, HCL.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE, AND LOCAL ENVIRONMENTAL REGULATIONS. EPA
WASTE#-DOO2-CORROSIVE WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.